To refill oil in a 2-stroke engine, you will first need to locate the oil reservoir or mixing container. Then, you will need to mix the appropriate ratio of 2-stroke oil and gasoline as specified by the manufacturer. Once the mixture is prepared, carefully pour it into the oil reservoir or mixing container. Be sure to use a funnel to avoid spilling and to prevent any debris from entering the engine. Finally, securely close the reservoir or mixing container and wipe away any spills. **

For a 125cc 4-stroke engine, it is recommended to use a high-quality, fully synthetic engine oil with a viscosity rating of 10W-40. This type of oil provides better lubrication and protection for the engine components, especially under high temperatures and heavy loads. It is important to check the owner's manual of the specific motorcycle to ensure the correct type and viscosity of engine oil is being used for optimal performance and longevity of the engine. **

To mix 2-stroke engine oil with another oil, you will need to ensure that both oils are compatible and have similar viscosity ratings. Start by pouring the recommended amount of 2-stroke oil into a clean container. Then, slowly add the other oil while stirring gently to ensure thorough mixing. It is important to follow the manufacturer's guidelines for the correct oil ratio to avoid damaging your engine. **

Oil has played a significant role in Nigeria's economy, contributing to a large portion of its GDP and government revenue. However, the heavy reliance on oil has also led to challenges such as corruption, environmental degradation, and economic instability. While oil has brought wealth to the country, it has not necessarily translated into sustainable development for all Nigerians. Therefore, it can be argued that while oil has been an important economic driver for Nigeria, it has not been a consistent or inclusive development engine for the country. **

It is not recommended to pour transmission oil into the engine as they serve different purposes and have different properties. Transmission oil is designed to lubricate and cool the transmission system, while engine oil is designed to lubricate and protect the engine components. Using the wrong type of oil can lead to damage and decreased performance of the engine. It is important to always use the recommended oil for each specific system in the vehicle. **

The motorcycle's engine expels oil through a combination of factors. First, the engine's internal components, such as the pistons, crankshaft, and bearings, create friction and heat, which can cause the oil to break down and be expelled as vapor through the engine's ventilation system. Additionally, the oil can also be expelled through the engine's breather system, which helps to release excess pressure and gases from the engine. Finally, any leaks or worn seals within the engine can also result in oil being expelled onto the exterior of the engine. Regular maintenance and inspections can help to prevent excessive oil expulsion and ensure the engine operates efficiently. **

No oil is worse for a car engine than using olive oil. Without any oil, the engine will experience metal-on-metal friction, leading to overheating and potential damage to the internal components. Olive oil, while not designed for use in car engines, can still provide some lubrication and protection against friction. However, it is not formulated to withstand the high temperatures and pressures that a car engine operates under, so it is still not a suitable substitute for proper motor oil. **

No, there is no Simson tuning engine that can operate without oil. Oil is essential for lubricating the engine components and reducing friction, which helps to prevent overheating and wear. Running a Simson tuning engine without oil would lead to severe damage and potentially cause the engine to seize. It is important to regularly check and maintain the oil levels in a Simson tuning engine to ensure its proper functioning. **