18000 Hz refers to the frequency of a sound wave, not its volume. The loudness of a sound is typically measured in decibels (dB), not in hertz. Therefore, it is not accurate to say that 18000 Hz is loud. The perception of loudness depends on the amplitude of the sound wave, which is measured in decibels. **

A non-WiFi-enabled computer can be connected to the internet via a LAN cable by plugging one end of the LAN cable into the computer's Ethernet port and the other end into a LAN port on a router or modem. The computer will then be able to access the internet through the wired connection. This method provides a reliable and secure connection, especially in situations where WiFi signals may be weak or unreliable. **

You can make a non-Wi-Fi enabled printer Wi-Fi enabled by using a wireless print server. A wireless print server connects to your printer via USB and then connects to your Wi-Fi network, allowing you to print from any device connected to the same network. Another option is to use a Wi-Fi enabled computer as a print server, where the computer is connected to the printer and then shares the printer over the Wi-Fi network. Both of these options will allow you to print wirelessly to a non-Wi-Fi enabled printer. **

To divide 18000 by 5, you can simply use long division. Start by dividing 18 by 5, which equals 3 with a remainder of 3. Then bring down the next digit, 0, to make 30. 30 divided by 5 equals 6 with no remainder. So, the final answer is 3600. **

It is generally recommended to keep both IPv4 and IPv6 enabled on your network. While IPv6 is the newer protocol and offers many advantages over IPv4, there are still many devices and services that primarily use IPv4. By keeping both protocols enabled, you ensure compatibility with all devices and services on the internet. Additionally, having both protocols enabled provides redundancy in case one protocol experiences issues or outages. **

The printer ink cartridge saving mode is a feature on some printers that allows users to conserve ink by adjusting the printer settings. This mode typically reduces the amount of ink used for printing, such as by printing in draft mode or using less ink for images and graphics. By using the printer ink cartridge saving mode, users can extend the life of their ink cartridges and reduce the frequency of replacing them, ultimately saving money and reducing waste. **

If the printer does not recognize the ink cartridge, it could be due to a few reasons. Firstly, the ink cartridge may not be properly installed or seated in the printer. Secondly, the ink cartridge may be incompatible with the printer model. Lastly, there could be a problem with the printer's software or firmware that is preventing it from recognizing the ink cartridge. It is recommended to double-check the installation of the ink cartridge and ensure it is compatible with the printer. If the issue persists, contacting the printer manufacturer for support may be necessary. **

To make a printer Wi-Fi enabled afterwards, you can purchase a wireless print server that connects to the printer via USB or Ethernet. The wireless print server will then allow the printer to connect to your Wi-Fi network, enabling you to print wirelessly from any device on the network. Another option is to use a Wi-Fi enabled router with a USB port, which can turn a non-Wi-Fi printer into a wireless one by connecting it to the router. Finally, some printers may have the option to add a Wi-Fi adapter or card to enable wireless printing capabilities. **